Adjust Paper Registration
- Product support for
- VersaLink C7120/C7125/C7130 Color Multifunction Printer
- Article ID
- KB0135135
- Published
- 2021-12-07
Use Adjust Paper Registration to adjust the placement of the printed image on the page. The adjustment allows you to place the top, bottom, left, and right margins exactly where you want. You can specify the image position on both the front and back sides of the paper, for each installed paper tray.
Verifying Paper Registration
At the printer control panel, press the Home button.
Log in as a System Administrator. See the Related Content for additional information.
Touch Device > Support > Image Position.
Select the source paper tray for the registration print.
Touch Paper Supply.
Touch the required tray.
If your printer has automatic 2-sided printing, select the sides you want to optimize.
To select a sample registration page for adjusting side 1, touch Adjusted Side, then touch Side 1.
To select a sample registration page for adjusting both sides, touch Adjusted Side, then touch Side 2.
Specify the consecutive number of sample pages to print.
Touch Print Settings.
To increase or decrease the number of sample pages, for Quantity, touch Plus (+) or Minus (-), then touch OK.
To print the sample pages, touch Print Sample.
When printing is completed, touch Close.
On the sample pages, for Side 1, use a ruler to measure the distance of the printed image from the top, bottom, left, and right edges.
NOTE: For identification, a single dot is printed on Side 1, and two dots are printed on Side 2.For Side 2, measure the distance of the printed image from the top, bottom, left, and right edges.
If the image is centered, no adjustment is required. If not centered, adjust the paper registration. For details, see Performing a Paper Registration Adjustment below.
Performing a Paper Registration Adjustment
At the printer control panel, press the Home button.
Log in as a System Administrator. See the Related Content for additional information.
Touch Device > Support > Image Position.
To adjust registration, select the source paper tray.
Touch Paper Supply.
Touch the required tray.
Using the chart printed in Verifying Paper Registration, select the side for registration.
For adjusting Side 1, touch Adjusted Side, then touch Side 1.
For adjusting Side 2, touch Adjusted Side, then touch Side 2.
To adjust the registration, touch Lead/Side Registration.
To adjust the side-to-side registration, for Side Registration, touch Plus (+) or Minus (-).
To adjust the top-to-bottom registration, for Lead Registration, touch Plus (+) or Minus (-). For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
For Lead Registration, a positive value shifts the image down the page.
For Side Registration, a positive value shifts the image to the left.
To save your settings, touch OK.
As required, repeat steps 4 through 6 to enter more values.
Print another sample page, then repeat the process until you complete the registration corrections.
To return to the Home screen, press the Home button.