Wizard Installation

The Installation Wizard starts the first time that you power on the printer. The wizard prompts you with a series of questions to help you configure basic printer settings. You can complete the initial configuration using the Installation Wizard or a clone file.

Note: A clone file contains configuration settings from one printer that you can use to configure a similar printer.

• To assign a static IP address or change the default dynamic addressing settings, use the IP Address Settings wizard.
  
  Note:

  • It is recommended that you use DHCP to obtain the IP address automatically.

  • If DHCP is enabled, your DHCP server can provide the Host Name and Domain Name. 

  • To ensure that the IP address does not change, use a DHCP reserved address. You can create a DHCP reservation for a permanent IP address on your DHCP server.

• To add phone numbers for support or supplies contacts, use the Contact Numbers wizard.

• To configure basic embedded fax settings, use the Fax Setup wizard.

Note: After the initial setup, to change any printer configuration settings, or to configure other printer settings, log in to the Embedded Web Server. For details, refer to Access the Embedded Web Server as a System Administrator.