Make a Copy

At the printer control panel, press the Home button.

To clear previous App settings, touch Reset.

Load the original documents using one of the following methods:

• Use the document glass for single pages or paper that cannot be fed using the duplex automatic document feeder. Lift the document feeder cover, then place the original document face down in the upper-left corner of the document glass.
  
  
  
  

• For single, multiple, or 2-sided pages, use the duplex automatic document feeder. Remove any staples and paper clips from the pages. Insert the original documents face up in the document feeder, with the top of the page entering the feeder first. Adjust the paper guides so that they fit against the original documents.
  
  
  
  

Touch Copy, then enter the number of copies needed.

NOTE: To amend the number of copies entered, touch the X button, then enter the required quantity.

If scanning from 2-sided original documents, touch 2-sided, then select an option.

Adjust the copy settings as needed.

Touch Start. If you placed originals in the feeder, scanning continues until the document feeder is empty.

If you are scanning from the document glass, when prompted, do one of the following:

• To complete the job and return to the Copy app, touch Done.

• To scan another page, load a new original document on the document glass, then touch Add Page.

• To delete the scan and return to the Copy app, touch Cancel Job, then touch Delete.
  
  NOTE: If you are scanning a document from the automatic document feeder, a prompt does not appear.
  
  

To return to the Home screen, press the Home button.