Log in as a System Administrator

The default administrator password is the device serial number. You can obtain the serial number from the back of the printer, from the configuration report, or from the home page of the Embedded Web Server. You can get the serial number from the control panel touch screen. At the control panel, press the Machine Status button, then on the touch screen, select Device Information. The serial number is in the General Information area of the touch screen. The password is case-sensitive.

Note: When the administrator password is set to the device serial number, administrator functions are not accessible. If the administrator password is set to the device serial number, at the next administrator login attempt, you are prompted to change the default administrator password. After you change the default administrator password, you have full access to administrator privileges.

To log in as a system administrator:

1. At the control panel, press the Log In/Out button.

2. Type admin, then touch Next.

3. Type the administrator password, then touch Enter.

To log out:

1. Touch Admin.

2. Touch Logout.

3. On the next screen, touch Logout.