Replace the Toner (Dry Ink) Cartridge

CAUTION: Do not use warm water or cleaning solvents to remove Toner (Dry Ink) from your skin or clothing. This will set the Toner and make it difficult to remove. If any Toner gets on your skin or clothing, use a brush to remove the Toner, or wash it off with cold water and mild soap.

For additional product and material safety information, click on the [Environment, Health and Safety] link in the Related Content section for additional information.

1. 1. Grasp the top right and left corners of the Front Door and pull down on the door until it rests in the open position.

1. 1. Locate the required Toner Cartridge. From left to right the cartridges are Black (K), Cyan (C), Magenta (M), and Yellow (Y).

   2. Grasp the cartridge and pull it straight out of the Printer.

      
      
      

   3. Remove the new Toner Cartridge from its packaging. Recycle the packaging.

   4. Shake the cartridge several times in an up and down twisting motion to distribute the Toner.

   5. Install the Toner Cartridge by aligning the arrow on the cartridge and the alignment tabs with the opening on the Printer, and then push in on the cartridge. Each cartridge has it own designated location by color (K,C,M,Y). Make sure the cartridge is completely installed.

1. Lift the Front Door into the closed position.

Related Content

• Xerox Environment, Health & Safety