Load Paper in Paper Tray 1
- Product support for
- Phaser 6500, WorkCentre 6505
- Article ID
- KB0090987
- Published
- 2016-04-14
Gently pull the paper tray all the way out of the printer.
Open the Output Tray to hold the printed sheets.
Slide the paper width and length guides to the edge of the tray. Extend the guides fully.
Before loading the paper flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface.
Insert all paper face-up with the top edge at the front of the paper tray.
NOTE: Do not force the paper into the tray. Be careful not to bend the paper.Slide the paper width guides until they rest lightly against the edge of the paper stack.
CAUTION: Be careful not to use excessive force on the tray. Doing so could damage the printer.Insert the tray back into the printer until it stops.
Set the Paper Type and Size. See the Related Content for additional information.