Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Clear the Paper Jam at Left Door A and Load the Correct Paper

Product support for
Phaser 7500
Article ID
KB0090721
Published
2016-04-11

NOTE: Follow the recommended guidelines and avoid problem areas to minimize paper jams. See the Related Content for additional information.

  1. Make sure Paper Tray 1 is in the down / operating position, and locate the latch for Left Door A. The latch is located on the left side of the printer, along the top edge.

    WARNING: Some components behind the left door may be hot.

  2. Left Door A

  3. Push up the latch and lower the door down.

  4. Left Door A Open

  5. Remove any jammed paper from inside the printer. Make sure to remove any pieces of paper.

  6. Remove Paper

  7. Raise Left Door A up into the closed position.

    NOTE: Make sure to set the paper width guides correctly. The placement of the guides indicates the width of the media installed, and is communicated directly to the Printer.

  8. For the paper tray indicated on the Display Screen, load the specified size and type of paper. See the Related Content for additional information. Verify the guides are set to the correct position (against the edges of the paper) and that the Touch Screen indicates the correct size to match the media loaded in the paper tray.




    Related Content