Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Replace Cleaning Rod or Cleaning Wand

Product support for
Phaser 6000, Phaser 6010, Phaser 6020, Phaser 6022, WorkCentre 6015, WorkCentre 6025, WorkCentre 6027
Article ID
KB0048259
Published
2016-10-13

  1. Open the Toner Access Cover.

    Open the Toner Access Cover


  2. Pinch the Toner Cartridge Release Lever upward, and then pull out slowly to remove the cartridge.

    Pinch the Toner Cartridge Release Lever upward, and then pull out slowly to remove the cartridge.

    NOTE: Do not touch any toner that may cling to the cartridge.


  3. Place the cartridge on the paper with the label side down to prevent spillage.

  4. Pull out the cleaning rod to remove it from the printer.

Pull out the cleaning rod to remove it from the printer


5. Return the cleaning rod to its original location.

Return the cleaning rod to its original location


6. Align the Toner Cartridge to the slot by aligning the geared post with the hole, and then insert the cartridge firmly by pressing in on the center of the label until the cartridge clicks in place.

Align the Toner Cartridge

7. Close the Toner Access Cover.

Close the Toner Access Cover