Adjust the Fuser Voltage for Optimum Print Quality Using the Printer Settings Utility

The Printer Setting Utility is installed on the computer when the print driver is installed. The utility has three tabs that help to monitor, maintain, and troubleshoot printer functions.

Use Adjust Fuser for optimum print quality across a wide range of paper types.

• If the toner on a print is smearing or can be rubbed off the paper, increase the offset for the paper you are using.

• If the toner is blistered or mottled, decrease the offset for the paper you are using.

To Adjust the Fuser:

1. From the computer, click on [Start], click on [All Programs], and then click on [Xerox Office Printing].

2. Click on the printer name, and then click on [Printer Setting Utility].

3. Click on the [Printer Maintenance] tab.
   
   NOTE: For information about using the Printer Setting Utility, click on [Help] in the Printer Setting Utility window.
   
   

4. Click [Adjust Fuser].

5. Change the offset value for the paper that you are using.

6. Click [Apply New Settings].