Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Replace the Drum Cartridge

Product support for
Phaser 3330, WorkCentre 3335/3345
Article ID
KB0047074
Published
2017-08-15

General Precautions for the Drum Cartridge

CAUTION: Do not expose the drum cartridge to direct sunlight or strong indoor fluorescent lighting. Do not touch or scratch the surface of the drum.

CAUTION: Do not leave the covers and doors open for any length of time, especially in well-lit places. Light exposure can damage the drum cartridge.

WARNING: Never throw a drum cartridge into an open flame. The cartridge can catch fire and cause burn injuries or an explosion.

  1. Open the front cover.

    Open front cover.

  2. Remove the toner cartridge and then the drum cartridge by lifting them up and straight out of the device. Set the drum cartridge aside for recycling. Set the toner cartridge aside but nearby to reinstall in the device after the drum cartridge is replaced.

    Remove toner and drum cartridges.

  3. Remove the drum cartridge from the packaging.

  4. Remove the packing material from the drum cartridge and set it aside for recycling.

    Remove drum cartridge from packaging and remove packing material.

  5. Install the drum cartridge by gently pushing in and down until it clicks into place. Do not touch the green roller. Do not expose the drum cartridge to light for more than five minutes. If necessary, cover the drum cartridge.

    Install drum cartridge.

  6. Install the toner cartridge by pushing in and down until it clicks into place.

    Install toner cartridge.

  7. Close the front cover.

    Close front cover.

  8. Recycle the used drum cartridge.

    Recycle drum cartridge.




    Related Content