Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Reseat the Toner (Print) Cartridge

Product support for
Phaser 3020
Article ID
KB0036803
Published
2016-04-25
  1. Open the Top Cover.



  2. Open Top Cover

  3. Pull the print cartridge out.

    Remove Cartridge

    CAUTION: Do not touch the green underside of the print cartridge. Use the handle on the cartridge to avoid touching this area.

    WARNING: When moving consumables, do not remove machine covers or guards that are fastened with screws. You cannot maintain or service any of the parts that are behind these covers and guards.

    Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your machine
    .



    CAUTION: If Toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets Toner into fabric.


  4. Hold the print cartridge by the handle and slowly insert it into the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place.

  5. Close the Top Cover. The machine status light on the Control Panel should be green, indicating the machine is ready to print. The Toner LED light should be out, indicating that the print cartridge has enough Toner to print.



  6. Close Top Cover