Adjust the Altitude

Product support for: Phaser 3020, Phaser 3052, Phaser 3260, WorkCentre 3025, WorkCentre 3215, WorkCentre 3225
Article ID: KB0036750
Published: 2016-04-25

Print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for the best print quality.

NOTE: Wi-Fi must be configured before you adjust the altitude. See the Related Content for additional information.

Before you set the altitude value, determine the altitude where you are.

Altitude	Value
0 - 1000 M 0 - 3,280 ft.	Normal
1000 - 2000 M 3,280 - 6,561 ft.	High 1
2000 - 3000 M 6,561 - 9,842 ft.	High 2
3000 - 4000 M 9,842 - 13,123 ft.	High 3
4000 - 5000 M 13,123 - 16,404 ft.	High 4

Enter the IP Address of the printer in the browser.
Select Login and enter the ID (admin) and Password (1111).
Select Properties > System > Setup.
Select an Altitude Adjustment value, based on your altitude in the table above.
Select Apply.