Power OFF, Reset the Printer Circuit Breakers, Then Power ON
- Product support for
- DocuPrint 135/135MX, DocuPrint 2000 Series 180/180MX Enterprise Printing System, DocuPrint 180 Laser Printing System, DocuPrint 180 LMX Large Format MICR Printer, DocuPrint 180MX, DocuPrint 4135 Laser Printing System, DocuPrint 4635 Laser Printing System, DocuTech 6100 Production Publisher, DocuTech 6115, DocuTech 6135, DocuTech 6155, DocuTech 6180, DocuTech 128 HLC, DocuTech 155 HLC, DocuTech 180 HLC
- Article ID
- KB0034047
- Published
- 2015-09-01
There are two locations for the circuit breakers that need to be checked.
There are three circuit breakers located behind the small door just to the left of the two large Processor Doors. The breakers are toward the bottom of the panel when the door is open.
There are two additional circuit breakers located on the two grey boxes on the bottom rear of the Processor. If the circuit breakers are switched off, power to the modules will be interrupted.
Open the right Processor Door.
Power off the machine using the main power button in the upper right corner.
At the rear of the Processor, there are two grey boxes toward the bottom with a set of white switch handles on each box. These are the circuit breakers. The circuit breakers are on if the handles are up. If the white handles are down, then push up on each switch handle to reset it.
Open the Electrical Module Door which is the small door just to the left of the two large Processor Doors.
There are three circuit breakers below the gauge; cb101, cb102, and cb103. Push up on each breaker handle to reset it.
Close the Electrical Module door.
Power on using the main power button.
Close the Processor Door.
