Reset a DocuColor 242|252|260 With a Built- in Fiery Controller to the Factory Defaults

NOTE: The DocuColor must be configured for TCP/IP (with an IP address, subnet mask, broadcast address, and gateway address), and Web Services must be enabled to perform the steps in this solution. If necessary, print a System Settings (Configuration) Report to make sure the machine has an IP address and that Web Services is enabled. See the Related Content for additional information.

CAUTION: The IP address will have to be reconfigured after performing this solution.

1. From the computer, open an Internet browser window.

2. Enter the IP address or DNS name of the Fiery Server in the Address field, and then press [Enter] on the keyboard. The Fiery WebTools window will be displayed.

3. Click on the [Configure] tab. The Configure screen will be displayed.

4. Click on the [Launch Configure] button. The Launch Configure screen will be displayed with a Login prompt.

5. Enter the password for the Administrator account.
   
   NOTE: The default password is "Fiery.1" for the Fiery WebTools. The "F" must be an uppercase letter and the there must be a dot or period between Fiery and the number 1. 
   
   If there are problems with the password, contact your System Administrator for additional assistance. If the administrator encounters a problem with access, contact Support to place a service call.
   
   

6. Click on [Server] to expand the menu.

7. Click on [Backup / Restore]. The Backup / Restore window will be displayed.

8. Click on [Restore Default Fiery Settings]. The message “Restoring the settings will reboot the Fiery. Do you want to continue?” will be displayed.

9. Click on [OK] to reboot the Fiery and restore the default settings.

10. After the Fiery has rebooted, reconfigure the Static IP address. See the Related Content.

Related Content

• How To Print a System Settings (Configuration) Report

• Make Sure the IP Address is Set to 'Static' on the Machine and the Network Controller