Log In as an Administrator, Operator, or Guest After Opening the EFI Fiery Command WorkStation (CWS) Application

NOTE: The steps below assume that the EFI Fiery Command WorkStation application is running and that the user is ready to login using a specific access level.

1. Click on the [Key] icon next to the server name. The Login (Server) window for the selected server, and three colored key icons, will be displayed.

2. Click on the [Key] icon that represents the access level required for this login.
   
   The key icons represent the following:
   
   

   Key color	Access Level	Privileges
   Purple	Administrator	Operator and Administrator rights to modify the setup of the Fiery Server
   Orange	Operator	Typical job management rights
   Cyan	Guest	View only; no rights to perform any tasks

   
   
   NOTE: The Password field is available. The default Administrator Password for the Fiery Server on an EFI Color Server With a Fiery Advanced Controller Interface (FACI) Kit is "Fiery.1". If the password has been modified try entering it blank. If the blank password does not work, contact a Network or System Administrator for assistance.
   
   One of the key icons may look different than the other two keys; this is the key that represents the access level for the last login.
   
   

3. Click on the [Log In] button. The Command WorkStation window will be displayed. This is the main job management window for the server you are logged into.
   
   NOTE: More than one connection to a server can be maintained at one time. If you need to login to an additional server, click on [Server], and then select [Log in / Log out]. The Login Server window will be displayed. Follow steps 1 - 3 for each server to be logged in to.