Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Replace the Staple Cartridge in the Booklet Maker of the Office Finisher LX

Product support for
AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer, Xerox EC8036 / EC8056 Color Multifunction Printer
Article ID
KB0028720
Published
2021-07-15

WARNING: Do not perform this procedure while the printer is printing.

NOTE: The images in this procedure are for demonstration purposes only and may not specifically match your printer model; colors, icons, and other minor differences may exist.

  1. Open the finisher side cover.

    open BM door on Ofc Fin LX

  2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening and slide them to the center.

    Ofc Fin BM move verticals if needed

  3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.

    ofc fin BM remove staple cartridge

  4. Hold the tabs on both sides of the new staple cartridge and insert it into the original position in the finisher.

    Note: If you have trouble inserting the cartridge, ensure that the staples are positioned correctly in the cartridge.

    IMPORTANT: The booklet maker uses two staple cartridges. Booklet stapling requires that both staple cartridges contain staples.

    install staple cart in ofc fin LX model

  5. Repeat the procedure for the other staple cartridge.

  6. Close the finisher side cover.