Select the Output Color (Color or Black and White) When Using Copy
- Product support for
- AltaLink C8030 / C8035 / C8045 / C8055 / C8070 Color Multifunction Printer, Xerox EC8036 / EC8056 Color Multifunction Printer
- Article ID
- KB0028641
- Published
- 2021-07-15
Before printing a copy of a color original image, you can adjust the balance of the printing colors between cyan, magenta, yellow, and black.
NOTE: The following steps are on a per job basis. Once the job completes, the default settings are applied to the next job unless otherwise modified. See the Related Content for additional information about defaulting this setting. You must have System Administrator rights to modify the default settings.
To select color or black and white output:
At the printer control panel, press the Home button.
Touch Copy.
Touch Output Color.
For Output Color, touch an option.
Auto Detect: The device detects the color content in the original document. If the original content is a color document, the printer makes copies in full color. If the original content is a black and white document, the printer makes copies in black only.
Black & White: This option produces copies in black and white only. Colors in the original content are converted to shades of gray.
Color: This option copies in full color output using all four printing colors, cyan, magenta, yellow, and black.
To access the Single Color option, touch More.
Single Color produces shades of a single color. To select a color, touch Color, then select an option. Your color selection appears on the sample page.
Touch OK.