Set the Default Paper Type and Color
- Product support for
- AltaLink B8045 / B8055 / B8065 / B8075 / B8090 Multifunction Printer
- Article ID
- KB0027143
- Published
- 2019-04-02
You can specify the default settings for paper type and color.
Note:
The system applies these default settings when paper type and color are not specified in the print job.
The settings may be configured from the touch screen or through the Embedded Web Server. Select your preferred method to configure these settings.
Set the Default Paper Type and Color Using the Embedded Web Server:
In the Embedded Web Server, click Properties > General Setup > Paper Management.
If necessary, click the Default Paper Type and Color tab.
For Paper Type and Paper Color, select the default paper type and color.
Click Apply.
Logout of System Administrator mode.
Set the Default Paper Type and Color from the Control Panel:
Touch Device > Tools.
Touch Device Settings > Paper Management > Paper Type and Color.
Select the required paper type and color from options displayed then touch OK.
Touch X.