Set the Rear and Right Side Skew Adjustment Levers (Trays 6 / 7)
- Product support for
- Xerox Versant 180 Press, Xerox Versant 280 Press, Xerox Versant 80 Press
- Article ID
- KB0014484
- Published
- 2020-11-03
The skew adjustment levers are found in all paper trays. These levers are used to improve paper feed accuracy and to reduce paper skew problems.
Note: These levers should remain in their default position (position zero). The position of these levers should be changed only if there is a skew problem when running a specific print job and/or media type. Changing the levers may cause more skew problems when running certain media types such as coated, label, transparency and film.
Default position (position zero):
Pull out the tray slowly until it stops. The Tray Properties / Settings automatically display at the press User Interface (UI).
From the Tray Properties window, verify that the correct paper information is being used including size, type, weight and paper curl or alignment option for the tray. Select OK and close the Tray Properties window.
At the tray, slide the rear skew adjustment lever to the right.
Gently push in the tray until it comes to a stop.
Run your print job.
The paper is fed accurately without skew and the printed output is satisfactory; your task is complete.
The paper is skewed and the printed output is unsatisfactory; proceed to the next step.
