Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Create a New Stock (From Tray Properties)

Product support for
Xerox Versant 3100 Press, Xerox Versant 4100 Press, Xerox Versant 2100 Press
Article ID
KB0013822
Published
2020-11-02
  1. From the Stock Library Manager on the print server, select the desired tray where the new stock will be loaded.


    The Tray Properties window for that tray opens.




  2. Select the Create New Stock button.


    The New Stock Setup window opens.




  3. Type a new stock name and modify the attributes as required.

  4. Select the Advanced Setup button.


    1. Select the various Advanced Stock Setup options as required. Refer to the Create/modify Advanced Stock Setup options procedure.

    2. Select OK to save any selections made and close the Advanced Stock Setup window.

  5. The stock may be either a temporary stock or a permanent stock in the Stock Library:

    • To make the stock a temporary stock, ensure that the Save In Stock Library checkbox is unchecked.

    • To permanently save the stock to the Stock Library, ensure that the Save In Stock Library checkbox is checked.

  6. Select OK to save and close the New Stock Setup window.

  7. Select OK again to close the Tray Properties window.

    The new stock is displayed on the Stock Library Manager.

    Before running the job, be sure to load the tray with the same stock as programmed.