Manual Decurling Feature on the Finisher
- Product support for
- Xerox Versant 2100 Press, Xerox Versant 80 Press
- Article ID
- KB0013597
- Published
- 2016-02-25
The finisher provides a manual decurling feature, which allows you to adjust the curl of the print output at point of need.
Pressing the Decurler button on the finisher switches the decurl feature between the Auto, On, and Off modes.
Auto button: When this indicator is lit, the appropriate curl correction is automatically performed depending on the sizes and orientation of the printed output. The button should be set to Auto for most situations. The button automatically switches to the Auto mode when:
The press is switched on
The press exits the Power Saver mode
When this button is pressed and the downward curl indicator is lit, downward curl correction is performed on all printed output. If your output is curled downward, press this button to prevent downward curls.
When this button is pressed and the upward curl indicator is lit, upward curl correction is performed on all printed output. If your output is curled upward, press this button to prevent upward curls.
When no indicator is lit, the press does not perform any curl correction to the printed output.
