Feed Modules (FM)

The Xerox Nuvera can be configured with up to two Feed Modules. They include a 4-Tray Feed Module which can be installed with an Integrated Scanner. The 4-Tray Feed Module, without a scanner, can also be installed as a second feed module and as a post-fuser Insertion Module.

An optional large format, high capacity 2-Tray Feed Module is also available.

The Xerox Nuvera can have any combination of of the 4-tray or 2-tray Feed Modules installed up to a total of two modules. If the 4-tray Feed Module has a scanner, it should be installed closest to the Print Engine.

Note

NOTE: You can configure your Xerox Nuvera with up to two feed modules. 

4-Tray FM Capabilities and Capacities

Note

NOTE: Some of the sizes shown below are the actual range of tray guide adjustment, rather than a nominal paper type. For example, 8.5 x 11 inches is a paper type, and 5.5 x 8.27 inches is the range of tray adjustment.

2-Tray FM Capabilities and Capacities

Note

NOTE: The 2-Tray Feed Module can NOT be used as an Insertion Module.

 

Both trays have the same specifications.

For more information on supported papers, see Recommendations for Paper Usage.

caution: possibility of damage to equipment if procedure not followed.

CAUTION!
Paper trays do not lock and can be opened while paper is being fed from the tray, resulting in misfeeds and/or paper jams. Wait for the LED light on the tray to turn OFF before opening the tray.