Sheet Feed Modules (SFM)

The Sheet Feed Modules hold your paper and feed the appropriate stock for the current job settings. The Xerox Nuvera EA Digital Production System can be configured with a 4-Tray Feed Module, a 2-Tray Feed Module or a 3-Tray Feed Module. Your system can include up to two SFMs in any combination of 4-Tray, 2-Tray or 3-Tray. The 3-Tray Feed Module is required if a Roll Feeder is installed.

The 2-Tray Feed Module has two large format large capacity trays. These trays are similar to trays 3 and 4 on the 4-Tray Feed Module but with a larger capacity, holding up to 1,600 sheets. Refer to the Feed Module Specifications.

The 4-tray and the 2-tray Feed Modules can be used as post fuser Insertion Modules.

The SFMs support automatic tray switching and the ability to load while printing.

For details about the 4-tray Sheet Feed Module and its trays, capacities, features and functions, browse the links below. The links are grouped according to the numbered areas in the diagram.

Feed Module Specifications Areas 1, 2, & 3 Paper feed path Clearing paper jams Area 4 Paper trays Loading paper trays Configuring paper stocks and tray settings Handling and storing paper Using special paper stocks Clearing paper jams Supported paper types Recommendations for paper usage Expected paper handling and copy performance

© Copyright 2007 Xerox Corp.
All Rights Reserved.