Rebooting the system (if prompted)  A2g

If you were prompted to reboot the system to enable changes made to network communication settings, perform the following procedure.

1. Select [Shutdown] from the System menu.

Yes - system will complete job processing and shutdown

Interrupt - system will shutdown immediately without completing job processing

No - system returns to the DocuSP screen

2. Wait for the status window to finish displaying its power down in progress message.
3. Power the system back on by pressing the on position (labeled I) on the power on/off button, located on the right front of the print station (to the right of the system's monitor).
4. Wait for the DocuSP screen to display and observe the status window until the window displays Printer Idle and Idle respectively.